Note SenseCAP Indicator is certified for FCC, CE, RoHS, and REACH across all models (D1, D1S, D1L, D1Pro). The D1 and D1S versions also hold official TELEC certification. Certificates can be downloaded from the provided link.
SenseCAP Indicator features a 4inch touchscreen powered by dual MCUsESP32 and RP2040and supports WiFi, BLE, and optional LoRa connectivity. With TypeC and Grove interfaces, plus ADC and IC support, it easily integrates with a wide range of peripherals through its rich GPIO resources.
Designed as a fully opensource IoT development platform, SenseCAP Indicator also supports Seeeds onestop Fusion ODM service for rapid customization and scaling.
-
Dual MCUs & Extensive GPIOs: Powered by ESP32S3 and RP2040 with 400+ Grovecompatible GPIOs for flexible expansion.
-
RealTime Air Quality Monitoring: Builtin tVOC and CO sensors, plus an external Grove AHT20 temperature/humidity sensor.
-
Local LoRa Hub: Optional Semtech SX1262 LoRa chip enables LoRa device connectivity to IoT platforms (e.g., Matter) via WiFi without extra gateways.
-
Fully Open Source: Leverages the ESP32 and Raspberry Pi ecosystems for limitless application development.
-
ODM Customization: Onestop Fusion ODM service available for tailored solutions and fast mass production.
Specification
| Screen |
3.95 Inch,CapacitiveRGB Touch Screen |
| Screen Resolution |
480 x 480 pixels |
| Power Supply |
5V DC, 1A |
| Battery |
N/A |
| Processor |
ESP32-S3: Xtensa dual-core 32-bit LX7 microprocessor, up to 240MHz
RP2040: Dual ARM Cortex-M0+ up to 133MHz
|
| Flash |
ESP32S3: 8MB
RP2040: 2MB
|
| External Storage |
Support up to 32GB Micro SD Card (not included) |
| Wi-Fi |
802.11b/g/n, 2.4GHz |
| Bluetooth |
Bluetooth 5.0 LE |
| LoRa(SX1262) |
LoRaWAN/(G)FSK, 21dBm Max Transmitted Power Sensitivity/-136dBm@SF12 BW=125KHz RX Sensitivity, Up to 5km (depending on gateway antenna and environments) |
| Sensors(Optional) |
Built-inCO2 (SCD41)
|
Range: 0-40000ppm
Accuracy: 400ppm – 5000ppm (50ppm+5% of reading)
|
|
Built-in TVOC (SGP40)
|
Range: 1-500 VOC Index Points |
|
ExternalTemperature and Humidity Sensor
|
Range: -40 ~ + 85 / 0.3 ; 0 ~ 100% RH/ 2% RH (25 ) |
| Buzzer |
MLT-8530, Resonant Frequency2700Hz |
Hardware Overview
The SenseCAP Indicator series offers four different versions: D1, D1S, D1L, and D1Pro. Each version is designed to meet different application needs without any extra cost from unnecessary hardware. Here are the differences between the versions:
Application
SenseCAP Indicator native firmware enables you to use it as a desktop air quality detector or you could customize one of your own styles. There are built-in tVOCs and CO2 sensors, and a Grove TH sensor is provided to connect externally to reduce heat interference to get more accurate temperature and humidity results.
The embedded SX1262 LoRa module enables you to build the LoRa application and connect your local LoRa sensors to the Cloud via Wi-Fi. For example, you could build a LoRa hub device to connect your LoRa sensors to your smart home ecosystem to implement Matter over Wi-Fi. In this way, the LoRa devices could be connected to the Matter ecosystem via Wi-Fi, without the need to buy a new Matter-compatible device.
The software of SenseCAP Indicator is completely open-source. Developers could create various IoT applications such as:
- Air Quality Monitor
- Weather Station Display
- Sensor Data Dashboard
- Smart Home Assistant
- Mini Sensor Hub
- Stock Price Indicator
- Digital Album
- Standard Operation Procedure Reminder
- …
It can also be used to develop various exciting applications integrating with third-party platforms, such as AWS / ChatGPT / Matter / NodeRED / IoTex …
SenseCAP Indicator X ChatGPT X DALLE Demo
SenseCAP indicator x Home Assistant Demo
Note
This sketch shows the development possibilities for the related IoT ecosystem, developers need to develop the firmware based on need.
SenseCAP Indicator is an interactive display and control terminal for various IoT applications. It provides developers with a powerful and interface-rich development platform powered by ESP32-S3 and RP2040 dual-MCU.
Don’t wait anymore, start your wonderful development journey with SenseCAP Indicator now!
ODM Service
Note
If you want to customize your own SenseCAP Indicator, Seeed Studio provides a one-stop ODM service for quick customization and scale-up.
With over 10 years of ODM & OEM experience, our engineers and product experts are proficient in delivering customization services for popular open-source hardware platforms, such as Raspberry Pi, NVIDIA Jetson, Beagleboard, ESP32, and more.
We are committed to assisting you at any moment and shortening your path from idea to product for emerging AIoT scenarios.
SeeedCo-Create Project
Become the next success story withSeeed Co-Create. All licensed projects, whether hardware, software, tutorial, or complete product will feature on the Seeed Studio store(Bazaar) individually or with Seeed Studio’s products for sale and you will get a share of the profits. We are looking for unique projects that strongly identify with Seeed Studio’s audience, solve real-life problems, fill a niche and/or spur inspiration and creativity. Find out how you can co-create and license your ideas and talents with us now!
Certification
| HSCODE |
9027100090 |
| USHSCODE |
8531200020 |
| UPC |
|
| EUHSCODE |
9027109000 |
| COO |
CHINA |
Part List
| SenseCAPIndicator |
x1 |
| USBType-CCable(1m) |
x1 |
| GroveAHT20THSensor (ForD1SandD1Proversion) |
x1 |
Unconditional Satisfaction Guarantee
