The legendary Joshua Bardwell F7 flight controller now in its V2 statetakes everything great about the original JBF7 and adds a few key features that you asked for. Just like the original, it’s got an F7 processor, SD card slot for black box logging, and 8 motor outputs. It’s got a flexible pad layout that can handle almost any combination of peripherals you could want. Paired with this FC is the iFlightBlitz E45S 45A 2-6S ESC, An amazing 4in1 ESC that comes with a pre-soldered capacitor, big solder pads with lots of space, And a very spacious board layout to allow for easier heat dissipation. Make this stack combo the next powerhouse for any 5 inch freestyle or speedy race build!!
RDQ Bardwell F7 V2 3-6S Specifications
- Input Voltage: 3-6S LiPo
- MCU: STM32F722
- Gyro:BMI270
- Barometer:DPS310
- Power Outputs: 5V 3A, 9V 3A (w/ Pit Switch), 3.3V, vBat
- BF Target:JBF7 V2
- UARTs:5 (I2C SDA/SCL shared with UART 3)
- Plugs: 4in1 ESC, RX, AnalogCam, HD Cam, VTX, LED/Buzzer
- Mounting Pattern: 30.5×30.5mm
- Weight: 8.3g (w/ gummies & USB Protector)
iFlight Blitz E45S ESC Specifications
- Input Voltage: 2-6S
- Max. Continuous Current: 45A
- Max. Burst Current: 55A
- Firmware: BLHeli_S
- MCU: BB21
- Target:QH-40 16.7
- BEC: No
- Telemetry Output:No
- Current Sensor: Yes
- Current Sensor Scale: 200
- Dimensions 40.5x42x6.5mm
- Mounting Dimesions: 30.5×30.5mm 4mm
- Weight: 14.7g
If you have any issues accessing the Black Box featuresplease type out this text in the CLI to get black box data to your SD card “set sdcard_detect_inverted=on” press ENTER, then type “save” and press ENTER.
Includes
- 1xRDQ Bardwell F7 V2 3-6S 30×30 Flight Controller
- 1xiFlight Blitz E45S 45A 2-6S 30×30 4in1 ESC
Wiring Diagram
Unconditional Satisfaction Guarantee
