MAMBA Basic F405 MK3 LITE FC& 40AMK2 8bit ESC 6S Stack
Diagram Link From Help Centre Link
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection when Mamba Led sys available
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- Upgrade the anti-interference cable
- Use TypecMost
- The pad area of the Mini flight controller (2020) increased by 140%
Added
- Add self-recovery insurance to the receiver’s 5V power supply.
- Increase the camera VCC power supply pad.
- The standard flight controller (30.530.5) adds a spare pad.
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.
FC Specification
MAMBA Basic F405MK3 lite
MCU: 168MHz STM32F405RGT6
GYRO: MPU6000
Barometer: No
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 5Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED4 Set 2812 LED
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A & 9V 3A
MOUNTING:30.5mm, M3
ESC Specifications
MAMBA F40 MK2
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:40A4
BURST CURRENT:50A (10S)
BEC: No
TargetBLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING:30.5mm/M3
Supply :
High-Frequency 470uF/35V 1
8pin sh1.02
12AWG 100mm 2
AMASS OriginalXT60
Unconditional Satisfaction Guarantee
