HeyGears Pulsing Release Module 2 Kit | Reflex 2/2 Pro

HeyGears Pulsing Release Module 2 Kit – Upgrade for Reflex 2 Series

The HeyGears Pulsing Release Module 2 Kit is an upgrade accessory for the HeyGears UltraCraft Reflex 2 series, including Reflex 2 and Reflex 2 Pro. It adds controlled pulsing release behavior to improve release consistency during MSLA resin printing, especially when printing fine supports, thin walls, complex geometry, and professional materials that benefit from a more stable separation process.

According to HeyGears, the Pulsing Release Module 2 upgrade can improve printing results by enabling more precise pulse control, supporting ultra-fine pillars up to 1 mm, reducing abnormal layer lines on thin-wall structures up to 3 mm, and improving support optimization potential. HeyGears also lists notable efficiency benefits, including 20% to 60% less support usage, 25% to 54% reduction in total support contact-point area in lab examples, contact point diameter reduction up to 30%, and contact point area reduction up to 70% under more extreme support settings. Actual results depend on model geometry, resin, and print profile.

This kit is particularly relevant when using HeyGears materials that require or benefit from PRM 2 workflows, including UltraPrint-Casting PAC10, UltraPrint-Tooling PAE10, and UltraPrint-Tooling PAU20. It pairs with the HeyGears UltraCraft Reflex 2 Pro and Reflex 2 series workflow; HeyGears notes that it is not compatible with PAWW10 and PAWW20 resins.

Technical Specifications

Module & Workflow Guide

• Reflex 2 series upgrade: Designed for HeyGears UltraCraft Reflex 2 and Reflex 2 Pro systems.
• Pulsing release control: Helps manage the release stage during MSLA printing for more consistent separation.
• Fine-detail workflow: Useful for models with ultra-fine pillars, delicate supports, and fine surface detail.
• Thin-wall workflow: Helps reduce abnormal layer lines on thin-wall geometries when used with the correct settings.
• Material boundary: HeyGears identifies PAC10, PAE10, and PAU20 as requiring PRM 2 support.
• Incompatible resin note: Do not use this module workflow with PAWW10 or PAWW20 resins.
• Setup validation: Confirm printer model, firmware/software workflow, resin profile, and module installation before production prints.
• Process control: Record resin, layer height, exposure, support settings, and print outcome when validating a new profile.
• Post-processing impact: Reduced support footprint can reduce finishing time, but final results depend on model geometry and resin.

Packing List

• 1 x HeyGears Pulsing Release Module 2 Kit

FAQ

Q: Which printers is this kit intended for?
A: It is intended for HeyGears UltraCraft Reflex 2 and Reflex 2 Pro systems.

Q: What does the module improve?
A: It improves pulsing release control during resin printing, helping with fine supports, thin walls, surface quality, and support optimization.

Q: What are the power specifications?
A: HeyGears lists 24V DC input and 25W rated power for the Pulsing Release Module 2 Kit.

Q: Which resins require PRM 2?
A: HeyGears identifies PAC10, PAE10, and PAU20 workflows as requiring PRM 2 support.

Q: Are any resins not compatible?
A: HeyGears states that PAWW10 and PAWW20 are not compatible with PRM 2.

Q: Does it guarantee the same support reduction for every model?
A: No. The listed reduction ranges depend on geometry, resin, profile, and support strategy.

Q: Is this the same as the older PrintBoost/Pulsing Release accessory?
A: No. This listing is for the Pulsing Release Module 2 Kit for the Reflex 2 series workflow.

Q: Why is the packing list short?
A: The public product information identifies the item as a kit but does not provide a fully itemized contents list, so the packing list avoids unsupported part breakdowns.