50% OFF! Hot items selling fast—Grab them before they're gone!

50% OFF! Hot items selling fast—Grab them before they're gone!

cart

No products in the cart.

View cart
Checkout
Happymodel Crux3 2S Micro Toothpick Drone

Happymodel Crux3 2S Micro Toothpick Drone

$53.00 $106.00

  • Unconditional Satisfaction Guarantee
  • No Shipping Fees Above 30
  • 2 Months to Decide. Returns Simplified.
SKU: FBL100091416760
Category:

The Crux3 is a great flying and affordable “toothpick” style quadcopter, maybe not strictly a toothpick but close enough. You also have the option to mount an insta360 go for some cool stabilised footage.

Key Features

  • 41gram 1-2s brushless Toothpick drone
  • New AIO 4in1 CrazybeeX flight controller
  • CADDX ANT 1200tvl Camera
  • New 1202.5 brushless motor
  • XT30 connector
  • Compatible with Insta360 Go Camera ( this camera is NOT Included, you can add it by yourself.)

Specification

  • Brand Name: Happymodel
  • Model: Crux3
  • Item Name: 115mm F4 OSD 1-2S 3 Inch Toothpick FPV Racing Drone
  • Wheelbase: 115mm
  • Size: 97x97x35mm (without propellers)
  • Optional Receiver Version:
    • Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
    • Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
    • Internal SPI DSM2/DSMX version(Compatible with Spektrum or Multiprotocol DSM2/X radio)
  • External Frsky RXSR receiver version(ACCST D16 sbus output)
  • External TBS Crossfire Nano receiver version
  • Weight: 41g (without battery)
  • Recommend Lipo Battery: 2s 350mah/400mah/450mah/520mah Battery ( NOT Included)

Detailed Component Specifications

EX1202.5 6400KV Motor Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:1.5mm
Motor Dimension(Dia.*Len):14*14.5mm
Weight: 4.4g
No.of Cells(Lipo):1-2S
Gemfan 3018 2-Blade Propeller Center Thickness:5.5mm

Prop Diameter:76.5mm

Center Hole diameter:1.5mm

CrazybeeX FR V2.2 F4 Flight Controller MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU6000 (SPI connection)
Board Size: 28.5×28.5mm
Power Supply: 1-2S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver or no receiver
Built-in 5V 1A BEC(Frsky SPI RX Version) CRAZYBEEX FR V2.2 FC Firmware target: CrazybeeF4FR(Flysky SPI RX Version) CRAZYBEEX FS V2.2 FC Firmware target: CrazybeeF4FS(DSM2/X SPI RX Version)CRAZYBEEX DXS V1.0 FC firmware target: CrazybeeF4DXS

(External Frsky RXSR Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX

(External TBS CRSF NANO Version) CRAZYBEEX PNP V2.2 Firmware target: CrazybeeF4DX

Onboard 5A BL_S 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.HEX
Default protocol: DSHOT600
Onboard Frsky SPI D8 Receiver Version SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky SPI receiver Version Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200~300mFailsafe support
Onboard DSM2/X SPI receiver Version SPI BUS receiver DSM2/DSMX compatible

Channels: Max 12ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

RSSI enable (show on the goggles)

External Frsky R-XSR receiver version Weight: 1.5g

Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)

Operating Voltage Range: 3.5V~10V

Operating Current:70mA@5V

Firmware Upgradable

Compatibility: FrSky X Series modules and radios in D16 mode

Could support Frsky New ACCESS Protocol ( Upgrade firmware)

External TBS CRSF Nano receiver version Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible
Onboard 5.8G 40CH 25/200mW VTX Output power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready
Caddx ANT 1200TVL Camera Image Sensor: 1/3″ CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL Switchable

IMAGE: 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: [email protected]

Auto Gain Control: YES

BLC: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Work Temperature: -20~+60

Weight: 2g (N.W.)

Included

  • 1x Crux3 Frame and Canopy
  • 1x F4 Flight Controller AIO 5A ESC Board
  • 1x 5.8G 25-200mW VTX ( built-in Flight controller)
  • 4x Happymodel EX1202.5 6400 KV Motor
  • 4x Gemfan 3018 Propeller CW
  • 4x Gemfan 3018 Propeller CCW
  • 1x Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
  • 1x Screw Driver
  • 1x Propeller Disassemble Tool

Shipping Info Standard Shipping
Cost: $25/Free Shipping We offer free shipping on orders over $30. Please check the free - shipping eligibility at checkout.
Delivery Time: It usually takes [3-5] business days for standard shipping. Please note that this is an estimated time frame and may be affected by local holidays, and unforeseen circumstances.

Related products