50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.The Grove – I2C Motor Driver (TB6612FNG) is a dual-channel motor controller capable of driving two DC motors or one stepper motor up to 12V at 1.2A. Its based on the TB6612FNG driver IC, which uses low-resistance LD MOS output transistors for efficient operation. The board supports four control modes: clockwise (CW), counterclockwise (CCW), short brake, and stop.
With an onboard microcontroller and Grove I2C interface, this module integrates easily with Grove-compatible microcontrollers without the need for complex wiring. The I2C address is configurable (default 0x14), making it suitable for systems with multiple devices on the same bus.
Additional features include thermal shutdown, low-voltage detection, and a standby mode for power saving. The board operates at 3.3V or 5V logic and supports motor supply voltages from 2.5V to 13.5V (typical 5V, max 15V). Its compact and lightweight, measuring 60 40 12mm and weighing 13g.
| MCU Operating Voltage | 3.3V / 5V |
| Motor Supply Voltage | 2.5 ~ 13.5V (5V typical, 15V max) |
| Output Current | 1.2A (average) / 3.2A (peak) |
| Switching Frequency | 100kHz |
| Logic Interface | I2C |
| I2C Address | 0x14 (default) |
| I2C Address Range | 0x01 ~ 0x7F (configurable) |
| Size | L: 60mm W: 40mm H: 12mm |
| Weight | 13g |
| Package Size | L: 140mm W: 90mm H: 12mm |
| Gross Weight | 20g |
