iFlight Blitz F7 E45 Flight Stack (F7 + 45A 4in1 ESC)

FC Features

• Improved circuit design, better components, and lower electrical noise!
• DJI HD VTX Connector (Plug-and-Play / No soldering required)
• FC indicator LEDs for visual debugging
• With LC filter

FC Specifications

• MCU: STM32 F722
• Gyro: BMI270
• Barometer: DPS310
• OSD Chip: AT7456E
• Flash: 32MB (Blackbox flash)
• UARTS: 6
• Motor outputs: 4x (SH1.0 connector)
• I2C serial: SDA / SLA pads
• Smartaudio / IRC Tramp VTX protocol supported
• LED controller: Yes
• Beeper pad: Yes
• Firmware target: IFRC-IFLIGHT_BLITZ_F722
• Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
• Dimensions: 36.5*35 mm
• Weight: 7.8g

ESC Specification

• Mounting Holes: 30.5*30.5mm/4mm
• Weight: 14.7g
• Supports 2-6S lipo input
• MCUBB21
• Constant: 45 Amps
• Burst: 55 Amps
• Current sensor: Yes
• BEC: No
• Current rate: 200
• Supports: DShot DShot150/300/600

Included

• 1pc BLITZ F7 V1.1 FLIGHT CONTROLLER
• 1pc BLITZ E45S 4-IN-1 2-6S ESC
• 1 set SILICON GROMMETS
• 1 set WIRE HARNESS FOR F7 FLIGHT CONTROLLER