Holybro Mini FOC ESC Based on VESC6

Life’s too short for subpar ESCs. Supercharge your FPV experience with Holybro Mini FOC ESC based on VESC6.

Product Highlights

• Unleash Power : A whoppin’ 20A continuous and 40A burst current.
• Futureproof Firmware : Stay ahead of the game with updatable firmware.
• Nerd Alert : VESC_TOOL compatible, because you like your software like you like your goggles: custom-fitted.
• Plug-N-Play : Comes with everything you need to kick some serious aerial acrobatics.
• Peanut-Size, Hulk Power : At just 18mm*65mm and 10g, it’s like fitting a jet engine into a paper plane.

You’re no rookie. You’ve felt the thrill of FPV soaring through the clouds or buzzing the treetops. But you’ve also felt the agony of defeat. Defeat born from a sluggish ESC that just couldn’t keep up. You’ve been grounded, humiliated, and all because your ESC failed to ESCape its limitations. Don’t let it happen again.

Enter the Holybro Mini FOC ESC. Imagine20A of continuous current coursing through your rig, with the capability to spike up to 40A when you really need to impress the drone honeys. What’s that? You’re future conscious? Well, good news eco-pilot, it’s got firmware that’s updatable faster than you can say “Holybro!” But wait, there’s more: It’s compatible with sensored AND sensorless motors. Finally, an ESC that gets you.

This is the ESC that’s been breadboarded in the heavens and soldered by the gods. Or something like that. Forget about size; this bad boy punches way above its weight class. At just 18mm*65mm and a featherweight 10g, you’ll barely notice it’s thereuntil you punch the throttle. Connectivity? We’ve got ports for days! PPM, SWD, COMM, and even a sensor port for the motor Hall sensors. And because we love you, we’ve thrown in everything from DuPont Wires to a clear heat shrink tube.

What’s in The Box

SKU31095 Single Pack:

• Mini FOC ESC *1
• Electrolytic Capacitor: 220uF 63v *1
• DIP Rectifier Diode *1
• 2.54mm DuPont Wire *1
• Clear Heat Shrink Tube *1
• 16AWG 100mm Red wire *1
• 16AWG 100mm Black wire *1

Pin Map

– GND1/2, DP(Data postive), DM(Data Minus/Negative): USB port for programming.

– GND1/2, PPM, +5V: PPM port to connect PPM transceivers.

– SWC(CLK), SWD(DIO), GND1/2, 5V: SWD port, to get direct access to the Chipset. Diagnostics, debugging, and real time data.

– A1(ADC1), A2(ADC2), TX, RX, GND1/2, 5V: COMM port for various kinds of other communication methods like I2C, ADC, Uart. You can use your Arduino or Raspberry Pi to control the VESC.

– 5V, TEMP, HAll1, Hall2, Hall3 GND: Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders).

PS: (GND1 and GND2 are same, for above ports containing GND1/2, you can just select one to use).

Resources

• Holybro Mini FOC ESC Manual
• Firmware Source Code
• Vesc-tool Download

For those who like to geek out on open hardware, this ESC is an Anton Chromjak original, with all due licenses and permissions. For the ultimate info-dive, check out the VESC Project and GitHub Repository .

Why Unmanned Tech?

• Epic Support : Need help? Our outstanding support team is just a click away.
• Fast Shipping : Because waiting is for ground dwellers.
• Quality Guaranteed : All our products are curated and tested by experts.

So why settle for less when you can have the best? Get your Holybro Mini FOC ESC today and make your FPV dreams a throttle-punching reality.